亚洲国产婷婷香蕉久久久久久,无码免费v片在线观看,欧美日韩不卡合集视频,亚洲在线视频

熱水潛水泵-深井泵-KAYSEN泵業

GERMANY KAYSEN PUMP CO .,LTD

熱水潛水泵主要適用于抽取地下熱水用來冬季供暖，洗浴，給工業企業提供能源，也可作為工業熱水循環泵之用，由于安裝方便，無需基礎投資，被廣大用戶所接受。

主要特點：

       ●可以抽取150℃以內的高溫?zé)崴?/span>

　　●用戶需要時可以選用臥式潛水泵。

　　●安裝方便，放到水池里通上電源就可使用。

　　●不容易進空氣，所以不存在灌泵的麻煩。

　　●電機采用耐高溫防水線，水潤滑、水冷卻、不易對環境造成污染。

　　●不需要建設泵房節約基建投資。

　　●設備運行性能穩定噪音極小?！?/span>

主要應用：
適用于地?zé)?、溫泉、冶金、化工、紡織、木材加工、造紙以及飯店、浴室、賓館等鍋爐高溫?zé)崴鰤貉h(huán)輸送以及城市住房采暖循環用泵，使用溫度150℃以下。

熱水潛水泵的保養：
          ●定期查看易損件
    首先查看潛水泵，潛水電泵，清水泵葉輪、扣環、軸套、軸承座等易損件是否無缺。好的可繼續運用，壞的則有必要在替換新的合格零件之后重新裝配運用，禁止運用損害和不合格的零件。
          ●替換光滑油
    分別翻開密封室和電動機內部的油孔螺釘，把密封室內和電動機內部的光滑油悉數放出，替換新油，以保證光滑系統的正常作業。
          ●保證潛水泵，潛水電泵，清水泵密封
    在替換密封室內的光滑油時，假如發現油質污濁且含水量已超支，則有必要替換整體密封盒或者動、靜密封環，替換的零件有必要為合格產品，以保證其密封功能。
          ●驅除濕潤水分
    對絕緣電阻值低于0.5兆歐的電動機繞組，有必要驅除濕潤水分，干燥的辦法同一般的電動機相同。若密封盒不需替換時，能夠只將電泵的定子部分拆下，一般情況下，密封盒部分應盡量不拆裝，如的確需求拆裝，則“O”形橡膠封環有必要替換新的。
          ●查看潛水泵，潛水電泵，清水泵軸承
    查看電動機部分的上、下軸承，若發現磨損或空隙過大，有必要及時替換新的軸承，禁止將就運用，以免造成更大的經濟損失。
          ●拆泵殼防生銹
    春季運用之前，應拆開最上一級泵殼，滾動葉輪后再合閘發動，以防部件銹死不能正常發動而燒毀電動機繞組，這項保養對充水式電動機尤為重要。
          ●保證軸承光滑
    對充水式潛水泵應查看替換上下端蓋軸承室的骨架油封及鋰基光滑脂，以保證軸承長時間在光滑杰出的狀態下正常運行。

The imported hot water submersible pump is mainly suitable for extracting underground hot water for heating in winter, bathing, providing energy for industrial enterprises, and also can be used as industrial hot water circulation pump. Due to convenient installation, no basic investment is required, and it is accepted by the majority of users.

main feature:

       ●It can extract high temperature hot water within 150 °C.

●The horizontal submersible pump can be used when the user needs it.

●Easy to install, put it in the sink and use it.

● It is not easy to enter the air, so there is no trouble in pumping.

●The motor adopts high temperature resistant waterproof wire, water lubrication, water cooling, and is not easy to pollute the environment.

● There is no need to build a pump house to save infrastructure investment.

● The running performance of the equipment is stable and the noise is extremely small.

main application:

It is suitable for geothermal, hot spring, metallurgy, chemical, textile, wood processing, papermaking, high temperature hot water pressurized circulation transportation of boilers, hotels, bathrooms, hotels, etc., as well as urban housing heating cycle pumps, using temperatures below 150 °C.

Maintenance of hot water submersible pumps:

          ● Regularly view consumables

    First check the submersible pump, submersible pump, clean pump impeller, retaining ring, bushing, bearing housing and other wearing parts are not missing. Good can continue to be used, and bad ones need to be reassembled after replacing new qualified parts, and it is forbidden to use damaged and unqualified parts.

          ● Replace smooth oil

    Open the oil hole screw inside the sealing chamber and the motor separately, and release the smooth oil in the sealed chamber and the motor inside to replace the new oil to ensure the normal operation of the smooth system.

          ● Guarantee submersible pump, submersible pump, clean water pump seal

    When replacing the smooth oil in the sealed chamber, if the oil is found to be dirty and the water content has been exceeded, it is necessary to replace the integral sealing box or the dynamic and static sealing ring. The replacement parts need to be qualified products to ensure the sealing function.

          ●Removing moist moisture

    For motor windings with insulation resistance values below 0.5 megohms, it is necessary to remove wet moisture. The drying method is the same as that of a normal motor. If the sealed box does not need to be replaced, it can only remove the stator part of the electric pump. Under normal circumstances, the sealed box part should be disassembled as much as possible. If it is really necessary to disassemble, it is necessary to replace the new "O" rubber seal ring. of.

          ●View submersible pump, submersible pump, clear water pump bearing

    Look at the upper and lower bearings of the motor part. If it is found that the wear or the gap is too large, it is necessary to replace the new bearing in time, and it is forbidden to use it, so as to avoid further economic loss.

          ●Removal of the pump casing against rust

    Before the spring application, the uppermost pump casing should be dismantled, and the impeller should be rolled and then closed to prevent the components from rusting and unable to start normally and burn the motor windings. This maintenance is especially important for water-filled motors.

          ● Ensure that the bearing is smooth

    For the water-filled submersible pump, the skeleton oil seal and the lithium-based smooth grease of the upper and lower end cap bearing chambers should be replaced to ensure the normal operation of the bearing in a smooth and outstanding state for a long time.

Stainless steel hot spring pump

Long shaft deep well pump

Stainless steel deep well pump

Submersible electric pump

       位于Schw?bischGmünd的凱森Kaysen泵業有限公司是世界*的各種流體水泵和隔膜泵制造商之一。60多年來，凱森以“制造”的可靠性和質量達到了*標準。憑借我們?nèi)娴漠a(chǎn)品組合，我們支持世界各地的客戶成功掌握供水，采礦，工業，化工，造紙，電力，食品，制藥，污水和海上行業的苛刻抽水任務。作為上述領域創新技術的*供應商，我們是液體需要安全，高效和經濟運輸?shù)?合作伙伴。

        凱森始終堅持“重質量，講信譽”為宗旨。產品現暢銷全國各地，并已逐步開發海外市場。公司多次被評為“重合同講信用”企業，深得用戶的信賴和廣泛的贊譽。

        The Kaysen Pumps GmbH in Schw?bischGmünd, Germany, is one of the world's leading manufacturers of fluid centrifugal pumps and diaphragm pumps. For more than 60 years, Kaisen has achieved the highest standards of reliability and quality of "Made in Germany". With our comprehensive product portfolio, we support customers around the world to successfully grasp the harsh pumping tasks of water supply, mining, industry, chemical, paper, electricity, food, pharmaceutical, sewage and marine industries. As a leading provider of innovative technology in these areas, we are the perfect partner for liquids to be safe, efficient and economical to transport. ,
          Germany Kaysen always adhere to the "quality, stresses credibility" for the purpose. Products are selling all over the country, and has gradually developed overseas markets. The company has repeatedly been rated as "the contract with the letter" business, won the trust of users and extensive praise.